Smart Ideas Garage Designs
Garage designs – An unfinished garage leaves nothing to save items a homeowner may want to protect. Tools, equipment, important papers and sentimental items can safely unpack in a garage closet when not in use. Building a simple garage cabinet is a DIY project most homeowners can fill in to create space in a garage. Find two wall knobs in the garage wall to screw the frame. Find a nose piercing with a stud search. Measure 16 inches either directions wall brackets are typically 16 inches apart. Confirm anchor points with a stud search.
Garage designs, measure the width of the curtains. The curtains will hide the stored items. The width, how far out of the wall to go with the frame and yet close the closet completely. The frame must be as deep as the room provides. Cut PVC pipes to the desired length according to the measurement.
Garage designs, cut PVC pipe to make two side rails and one end cap. End protection should be as long as the two male hands are apart. Attach three pieces together with two 90-degree bends to create a rectangular U shape. Glue PVC pipe for mounting with PVC glue. Measure the depth of the closet. Suspend a piece of wire from the ceiling to use as a support for the frame when the frame is screwed on the wall. Screw one end of the cord into a loft stud or loop it over a drop of ceiling frame.